Ryden Bikes
Measurement & setup tool
Profiles
Saddle
Bars
Hands
No orientation sensor present, or access not yet granted!
If you accidently denied access, clear the device cache for this site and reload
Current Profile:
+ Create new
Tool Version
v4 (1 piece)
v5+ (2 piece ruler)
Advanced Mode
All profile data is stored in your browser and will be lost if you clear browser data. The backup and restore function can be used to export the data as text, which you can easily copy to a document or email. This can also be used to transfer profiles to other devices.
Backup/Restore
Reset Data
Please copy/paste the complete text from the box below to backup and restore your data. You can also edit this, but be careful!! Press Save when done.
Save
Measure saddle angle
Pitch
Roll
Use seat clamp to locate saddle centre reference point.
Active
Profile
BB to Saddle (angle)
BB to Saddle distance
Crank Length
BB to saddle "X"
BB to saddle "Y"
Saddle centre to tip
Setback to saddle tip
UCI compliance: Setback to saddle tip >=50mm
Saddle clamp X offset (0-3mm)
Details
Save Active to Profile
(All measurements must be in mm)
Measure handlebar angle
Pitch
Roll
Measurements on this page use handlebar centre at stem as reference point.
Active
Profile
BB to handlebars (angle)
BB to handlebars distance
BB to handlebar X
BB to handlebar Y
Saddle to handlebar drop
Save Active to Profile
(All measurements must be in mm)
Measure handle position angle
This page references hand position on the top of the handlebars.
Active
Profile
Hand position Angle from Saddle
Hand position tool measurement
Saddle centre to hand position
Hand position height from ground
Saddle to hand position drop
BB height from ground
UCI compliance: BB height 240-300mm
Save Active to Profile
(All measurements must be in mm)